background image

  

|

 27

January 2020 

|

 Solar Stik

®

, Inc.

Operator and Maintenance Manual for PRO-Verter RMK LAN

Mission Statement

Using American-made components and constant innovation, Solar Stik creates portable power 
solutions that enable self-sufficiency for the soldier, the sailor, and beyond. In doing so, we save 
lives, change lives, and help revive American manufacturing.

STIKopedia

STIKopedia

 is a compilation of everything you would ever want to know about portable Hybrid 

Power Systems, including the philosophy and mechanics of high-efficiency circuits, and the 
individual technologies used to create them. 

Solar Stik Training and Education

•  Solar School (St  Augustine, FL)

 provides an introduction to the design and support of small-

scale, renewable-energy, power generation systems, with detailed explanation of system 
components. Advanced configuration options with hands-on deployment of actual systems will 
enhance student understanding.

•  Solar Stik New Equipment Training (on site) 

teaches Hybrid System configuration options with 

hands-on deployment of actual systems to enhance student understanding.

Solar Stik Training Courses are tailored to the specific needs of the students. To schedule Solar Stik 
Training or to learn more about the curriculum, please contact us.

Contact

Technical Support Line

800-793-4364 Ext. 102 
(24 hours a day, 365 days a year)

Address

Solar Stik, Inc.
226 West King Street
Saint Augustine, Florida 32084

Website

www.solarstik.com

Trademarks and Logos are the property of Solar Stik, Inc. unless otherwise noted.

This manual is subject to revisions without prior notice.

©2020 Solar Stik, Inc.

All Rights Reserved.

ABOUT SOLAR STIK, INC 

Summary of Contents for PRO-VERTER




























Reviews: