|
29
December 2020
|
Solar Stik
®
, Inc.
Operator and Maintenance Manual for the PRO-Verter S 3000
PRELIMINARY
ALL Solar Stik equipment is designed for operation in adverse conditions; however, certain rules
apply:
1
If operating in wet environments, use common-sense placement to avoid water intrusion by either
flooding or precipitation.
2
If operating in dusty environments, ensure good airflow by keeping air filters clean and placing
unit in a location that minimizes exposure to particulates.
Direct ground placement of any power management or energy storage component is generally not
recommended, but possible if no other option is available. If it is necessary, preventative measures
for water and dust should be taken. Consult the
additional details and component-specific preventive maintenance checks and service (PMCS).
1 Minimize Potential for Water and Dust Intrusion
OPERATOR INSTRUCTIONS