Solar Stik PDM 3000, Operator And Maintenance Manual, Page: 18 / 23

Operator and Maintenance Manual for the PDM 3000
April 2020 | Solar Stik ® , Inc. 18 |
Item #
Item to be
Inspected Interval Procedures Non-mission Capable
1
Visual
inspection of
PDM 3000
M
1. Inspect case for visible damage
and missing items.
2. Clean excessive dust or dirt
accumulation from the exterior,
interior, and connectors and from
the cutouts on the bottom.
3. Close all unused port covers.
~If the case is broken or split or
if connectors are damaged, do
not place into service.
Table 1. PDM 3000 PMCS
PDM 3000 PMCS
Figure 14. PDM 3000 bottom cutouts
The PDM 3000 case is sealed. No maintenance of internal parts is required or advised.
cutouts