|
37
December 2020
|
Solar Stik
®
, Inc.
System Setup and Operation Manual for the Solar Stik G-BOSS E Light HPS
PRELIMINARY
i MEP-802A and MEP-831 TQG
Connect ONLY to Gen Comm #1 port on the front of the PRO-Verter and the Auto Generator Control
port on the TQG using the 25’ TQG Gen Comm Cable.
c Connect PRO-Verter to Generator Comms Cables
Figure 29. MEP-831A and MEP-802A Gen Comm Cable connections
PRO-Verter GEN COMM port specificity
• Defender/Ranger MPG single operation
– Connect to Gen Comm #1 or #2 port.
• Defender/Ranger MPG tandem operation
– Connect to Gen Comm #1 and #2 ports. (Use 120
VAC Parallel Power Cable.)
• Tactical Quiet Generator (TQG; optional)
– Connect ONLY to Gen Comm #1 port.
The Gen Comm Cables
for these generators have
a 10-pin connector on
the PRO-Verter end and
a 4-pin connector on the
generator end.
MEP-802A 5 kW
MEP-831A 3 kW
Gen Comm ports
Generator Type
selection switch
PRO-Verter S 3000
