Solar-Log 1200 User Manual Download Page 69

Page: 69 / 158

Operating the Solar-Log 1200 and 2000 via Touch Display

You have the following options from the USB menu:

Save all data:

•

The Solar-Log™ creates the folder "backup" on the stick and saves the solarlog_backup.dat and

solarlog_konfig.dat files there.

Import yield data:

•

The Solar-Log™ searches for a valid solarlog_backup.dat file on the USB stick and imports it.

Import configuration:

•

The Solar-Log™ searches for a valid solarlog_konfig.dat file on the USB stick and imports it.

Firmware update:

•

The Solar-Log™ searches for a firmware update to import and then starts the update.

Note

For technical reasons, only the last 30 days of minute values are saved when

making a data back-up. To ensure the preservation of all data files, including the

minute files, we recommend registering the Solar-Log™ on either our “Classic 2nd

Edition” or “Commercial Edition” web portals.

Note

As soon as a USB stick has been plugged in, the folder named "Backup" is auto-

matically created on the USB stick. At the end of the day, the Solar-Log™ saves a

daily backup with the date in this folder.

Important:

The Solar-Log™ does

not

overwrite the daily backup files. Thus it is important to

regularly backup or exchange the USB stick before it runs out of space.

Important:

When importing data from the USB stick, all of the data on the device is deleted

and replaced.

Note

Import the current configuration before importing saved yield data.

Summary of Contents for 1200































































































































































Search results

Summary of Contents for 1200

Reviews:

Related manuals for 1200

Brands by name

Popular brands

Solar-Log 1200, User Manual

Search results

Summary of Contents for 1200

Reviews:

Related manuals for 1200

Brands by name

Popular brands