Solar-Log 1200 User Manual Download Page 62

Page: 62 / 158

Operating the Solar-Log 1200 and 2000 via Touch Display

The following symbols are displayed in the left-side navigation menu and can be selected for additional

options:

Power

Yield History

Environmental per-

formance

Settings

the display window with:

•

Solar-Log™ type

•

the connected devices (inverter, power meter etc.)

•

a table with the following values: earnings from PV, purchased power (only with connected meters)

and the total for the day and overall.

Swipe your fingers on the display, either from right to left or left to right, to switch to the next view.

There is a split-screen window for the energy balance, environmental performance and yield history menus.

The dots at the bottom of the screen(

) indicate the current page of the menu.

You can always view the power output for the current day by tapping on the top area with the time and

date. The current Dashboard is displayed by tapping on it twice.

Summary of Contents for 1200































































































































































Search results

Summary of Contents for 1200

Reviews:

Related manuals for 1200

Brands by name

Popular brands

Solar-Log 1200, User Manual

Search results

Summary of Contents for 1200

Reviews:

Related manuals for 1200

Brands by name

Popular brands