Solar-Log 1200 User Manual Download Page 44

Page: 44 / 158

Operating via a web browser within your own network

Fig.: Feed-In Management - Feed-balance

The

Feed-balance

tab displays when power output was fed into the grid and when power was purchased

from the grid. Negative values mean that the power was purchased from the grid and positive values mean

that power was fed into the grid.

The power reductions are displayed in a table with two columns in the

PM History

tab.

•

Event from - to:

•

The time and date that a power reduction was activated.

•

Power reduction:

•

The power reduction as a percentage.

Two additional tabs can be accessed via the Power Management section:

Utility Meter

I/O Box

There is a detailed guide for this in the "Special Functions | Power Management" chapter of the Installation

Manual.

Summary of Contents for 1200































































































































































Search results

Summary of Contents for 1200

Reviews:

Related manuals for 1200

Brands by name

Popular brands

Solar-Log 1200, User Manual

Search results

Summary of Contents for 1200

Reviews:

Related manuals for 1200

Brands by name

Popular brands