Solar-Log 1200 User Manual Download Page 142

Page: 142 / 158

142

Faults (Solar-Log 200, 500 and 1000)

Fig.: Removing the cover from the Solar-Log™

Pull the cover forward to remove.

Restarting

1. Press the reset button for a long period, e.g. with a straightened paper clip

•

LED:1, 2

2. Release the reset button.

•

After about 5 seconds, LED 1 is lit again.

3. Release the reset button.

•

Wait until normal operation has recommenced and then close the cover.

Important:

Do not restart by pulling out the power plug!

12.3 Obtaining information from the Internet

You can also obtain support for operating the device or the settings on our Internet site under the follow-

ing URL:

http://www.solar-log.com/en/service-support/technical-support.html

Here you will also find additional product information and manuals available for download.

Summary of Contents for 1200































































































































































Search results

Summary of Contents for 1200

Reviews:

Related manuals for 1200

Brands by name

Popular brands

Solar-Log 1200, User Manual

Search results

Summary of Contents for 1200

Reviews:

Related manuals for 1200

Brands by name

Popular brands