Solar-Log 1200 User Manual Download Page 126

Page: 126 / 158

126

Using the Solar-Log™ App iPhone V3 for iPhones

9.4 The top menu bar

The following items can be selected from the top menu bar:

•

Back

•

Today

•

Legend

•

Slide show

Touch Back to go back to the plant settings page.

Fig.: Plant settings.

The following settings can be configured:

•

Update intervals

•

Plant update intervals are from 5 to 60 minutes.

•

CO2

•

The CO2 factor can be adjusted from 0.0 to 1.0 (see the chapter "Viewing CO2 Savings").

•

Slide Show (see the chapter "The Yield Data as a Slide Show").

•

Sound (see the chapter "The Yield Data as a Slide Show").

•

Clear cache.

•

Delete all of the App's cached data. It is necessary to restart the App.

Touch

Today

from any view to go to the current Daily values.

Touch

Legend

to hide and unhide these values.

Touch

Slide Show

to start this with the previously adjusted settings (see the chapter "The Yield Data as a

Slide Show"

Summary of Contents for 1200































































































































































Search results

Summary of Contents for 1200

Reviews:

Related manuals for 1200

Brands by name

Popular brands

Solar-Log 1200, User Manual

Search results

Summary of Contents for 1200

Reviews:

Related manuals for 1200

Brands by name

Popular brands