Solar-Log 1200 User Manual Download Page 121

Page: 121 / 158

121

Using the Solar-Log™ App iPhone V3 for iPhones

9 Using the Solar-Log™ App iPhone V3 for

iPhones

We offer a Solar-Log™ App iPhone V3 for iPhones, iPads and iPod Touches to allow you to access your

plant data at any time and from any location. The Solar-Log™ App is available for free from the Apple App

Store.

The App displays current and past yield data in a graphical form. In addition, there is the possibility to

display power consumption. Intuitive finger gestures (swipes) enable you to quickly navigate between dif-

ferent time period views (daily, monthly, yearly and total).

Note

When starting the App for the first time, there is a brief introduction on how to

operate the App.

Requirements

Our Solar-Log™ App is compatible with every iPhone, iPod Touch and iPad starting from iOS version 3.0.

Note

The Solar-Log™ App only runs with the server solution Solar-Log™ Web Classic 2

and the WEB Commercial Edition from Solare Datensysteme GmbH.

The Solar-Log™ Web Classic 1* and Self-made* editions are not supported.

*It only pertains to new plants; existing plants will continue to be displayed.

9.1

Installing the App

The App is available for free from the Apple App Store.

Loading the App

Search for "Solar-Log" in Apple App Store

Follow the directions to download and install the App on your mobile iOS device.

Start the App

Fig.: The App icon

3. Start the App on your iOS device by tapping on the icon.

•

The start screen is displayed with the saved plant.

Summary of Contents for 1200































































































































































Search results

Summary of Contents for 1200

Reviews:

Related manuals for 1200

Brands by name

Popular brands

Solar-Log 1200, User Manual

Search results

Summary of Contents for 1200

Reviews:

Related manuals for 1200

Brands by name

Popular brands