Solar-Log 1200 User Manual Download Page 120

Page: 120 / 158

120

Using the Solar-Log™ Android App

8.9.3 Solar-Log™ Widget for Smartphones

With an Android smartphone, you can display yield reports from your plant with the Solar-Log™ Widget.

(Activating Widgets: see the phone's user manual).

The Widget allows the plant's current daily yields to be displayed directly on your smartphone's home

screen.

Changing the view:

The view can be directly changed in the App. All you have to do is tap on the Widget.

Adjusting the size and positioning the Widget:

Press on the Widget 1 to 2 seconds to change the size. A box with four points pops up. Move one of the

four points to define the size.

To select the Widget's position, tap and hold the Widget and move it to the desired position.

Note

For Android versions less than 4.0, 2x1, 2x2 and HD can be selected for the Wid-

get.

Only HD is available for Android versions greater than 4.0.

The HD format for the newer Android versions, however, can be displayed in vari-

able sizes.

Summary of Contents for 1200































































































































































Search results

Summary of Contents for 1200

Reviews:

Related manuals for 1200

Brands by name

Popular brands

Solar-Log 1200, User Manual

Search results

Summary of Contents for 1200

Reviews:

Related manuals for 1200

Brands by name

Popular brands