Solacom SS7, Quick Start Manual

Page: 23 / 66

SS7 Quick Start Guide
11

The SS7 script files are in
/export/home/NewNet/access/bin

The SS7SIL script files supplied by Solacom are in
/export/home/SS7SIL

The administration server hosts the following:

IQadmin at:
Click Start>All Programs>Solacom Technologies>IQadmin>IQadmin

Log files at:
I:\EdgeIQ\Mesoware\Logs\
Logs can be viewed within IQadmin. Refer to IQadmin User Guide.
3.2 Connecting the SS7 Module to the Network
SS7 connectivity to the network is provided by T1 interfaces located on the SS7
module. Sample connections for a redundant system are listed below:

Side A SS7 Module Line 1 connection to the network using an RJ-48C
straight cable. Maximum cable length is 100 feet.

Side B SS7 Module Line 1 connection to the network using an RJ-48C straight
cable. Maximum cable length is 100 feet.
Typically one or two channels from a span are used to convey signaling information
to and from the SS7 network. The remaining channels are not used.
Figure 5: Network Connection
3.3 Viewing the Mesoware.ini Configuration
Typical connections and ―Mesoware.ini‖ file configurations for a sample shelf with
an ID of 25 and external VSOS servers are shown below: