SOL paragliders ATMUS 2, Paraglider'S Manual, Page: 6 / 23

10 11
1. Trailing Edge
2. Stabilo
3. Stabilizers’ lines
4. Brake Lines
5. Carabiners
6. Risers
7. Main Lines
8. Middle Lines
9. Top Lines
10. Leading Edge
11. Label
OVERVIEW GLIDER
The upper lines distinguish themselves (9), next to the inside layer, the middle lines (8) and the
main lines (7), which are connected to the Quick Links (5). These, in turn connect to the main
lines on the risers (6). The stabilizers’ lines (3) are connected to the same Quick Links (5).
The brake lines (4) come out of the trailing edge, through the master line and are linked to the
toggles, passing through a pulley attached to the ‘C’ riser. The brake lines are of different color
in order to facilitate takeoff preparation.
On the brakes’ master lines, there is a mark at the ideal setting point, at which height the toggles
are affixed. This setting should not be altered as it ensures adequate and sufficient path and
room for the toggles in case of emergency situations during flight and landing. Furthermore, in
this position the paraglider is not constantly on a stall.
11
1
10
2
3
4
5
6
7
8
9
RISERS AND SPEED SYSTEM
The ATMUS 2 doesn’t have trimmer but can be used with a speedbar. He has 3 risers on each
side, with the ‘A’ lines attached to the ‘A’ riser. The riser ‘A1’ is divided to make “ears” easy. The
‘B’ lines and the stabilizer are attached to the ‘B’ riser. And lines ‘C’ are attached to riser ‘C’
additionally to the brake pulley.
The Speed System works on the risers ‘A’, ‘A1’ and ‘B’. When set at the normal position, all
risers have the same length. When the Speed System is activated, it shortens the risers ‘A’, `A1´
and ‘B’. The riser ‘C’ remains in its original position.
1- Ears
2- System of increase speed
3- Speed System Connection
4- Speed Pulleys
5- Brake pulley
6- Swivel
7- Magnetic button
8- Toggle
9 - Carabiner’s harness connection
1
2
3
4
Normal position
Speed System activated
560mm
5
6
7
8
9
470mm
430mm
560mm