Sokkia SHC6000, Operator'S Manual

Page: 9 / 60

Chapter 1 Getting Started
5
helps you pull the battery out). Place the back edge in first,
gently pushing it underneath the two battery catches.
Rotate the front edge down until it is in position.
CAUTION: Do not insert the battery pack straight down.
Damage to the unit could occur.
4. Replace the door and press down on it until the latch pops
into the locked position.
5. Attach the appropriate plug for your country into the AC
wall charger and plug it into a wall socket. Plug the other
end into the DC power jack on the SHC6000.
Note: Use the AC wall charger that came with the SHC6000 or
another approved charger from Sokkia.
6. Charge the battery pack at room temperature (68°F or
20°C) for 6 hours (for the first charge). While the battery
pack is charging, the red LED blinks. When it is fully
charged and external power is applied, the red LED is
solid.
Note: The SHC6000 will not recognize an internal battery until
the SHC6000 is being charged for the first time.
Perform Set Up
The first time the SHC6000 is powered on, Windows setup
options are shown. Follow the prompts to set up your unit as
desired.
!
Black Tab