Sokkia SHC6000, Operator'S Manual

Page: 18 / 60

14
SHC6000 Field Computer Operator’s Manual
3. Make Bluetooth discoverable on both devices. Bluetooth
on the SHC6000 is off by default. To activate it, open the
Action Center and press and hold the Bluetooth icon. Select
Go to settings .
4. In the Bluetooth settings screen, you should see a list of
all Bluetooth devices within range. Tap on the name of
the device in the list you would like to pair with, then tap
Pair . If prompted, enter the PIN or pass code of the paired
device. You should now be paired with the device.
Note: If Bluetooth is on and the SHC6000 enters sleep or
hibernate mode, Bluetooth turns off to save battery power. The
connection is resumed once it powers back on.
Wi-Fi Wireless Networking
The SHC6000 has built-in Wi-Fi wireless networking to connect
to the internet or an office network.
Connecting to a Wi-Fi Network
To use Wi-Fi, you need to be in range of a Wi-Fi access point to
make a connection. When Wi-Fi is turned on (the default), the
SHC6000 automatically starts scanning the area for available
Wi-Fi networks.
From the Action Center, click and hold the
Wi-Fi network icon ,
then select go to settings . A list of available networks is shown.
Select the network you want to use and enter the network
security key. The SHC6000 remembers the Wi-Fi network
connections created.
Wi-Fi can be turned off and on and settings can be managed
from this set up screen.
GPS/GNSS
The SHC6000 field computer uses an integrated GPS/
GNSS receiver with an internal antenna to provide position
information. Use Maps to see your location and ensure that
the receiver is working. Open the Start menu and select Maps .