Sokkia SHC5000, Owner'S Manual

Page: 17 / 68

Chapter 2 Standard Features
13
Key Function
Power
„
Press and release: On or sleep
„
Hold for 5 seconds and pull down screen: Power
off
„
Hold for 10 seconds: Reset device. CAUTION:
before doing this, see the Sleep, Reset, Hibernate,
Power-Off, and Recovery section in this chapter.
„
Hold for 20 seconds: Electrically disconnect the
battery pack(s); to reconnect the batteries, you
are required to plug in the charger or external
12 V power. CAUTION: before doing this, see the
Sleep, Reset, Hibernate, Power-Off, and Recovery
section later in this chapter.
Programmable Keys
The F1, F2, and ESC keys can be configured to launch
applications or functions.
To adjust the programmable keys, open the Start menu
and select Keypad (located at the bottom of the Start
menu screen in a tile). The Keypad Buttons and Backlight
panel appears. The programmable keys and their current
assignments are shown. Select your preferred function for
each key from the drop down menus.
Keypad Backlight Brightness
To adjust the keypad backlight brightness, go to the Start
menu and select Keypad At the bottom of the Keypad
Buttons and Backlight panel is a slider that adjusts the
keypad backlight brightness. You can make the backlight
brighter by moving the slider to the right or turn it down by
moving the slider to the left. Dimming the keypad backlight
saves battery power when the SHC5000 is in use.
Power Management
The SHC5000 runs on battery power, using a rechargeable Li-
Ion battery pack. The SHC5000 also has an internal battery.
The SHC5000 operates on either or both battery packs.
!
!