manualshive.com logo in svg

Sokkia iX-1001, Operator'S Manual, Page: 61 / 177

Share
Download
Sokkia iX-1001 Operator'S Manual Download Page 61

57

10. TARGET SIGHTING AND MEASUREMENT

 Lost Prism

In the event that an obstacle prevents the instrument sighting the target during Auto Tracking, the 
instrument will predict the direction in which the target will travel and continue Auto Tracking based on this 
prediction for the time period set in "Forecast time". If the instrument re-acquires the target in this predicted 
direction, Auto Tracking continues without change. If the target is not re-acquired however, the target is 
considered "lost" ("Target lost" status) and the instrument starts "Prism wait" and "Search (twice)" in order. 
If the instrument re-acquires the target in this process, Auto Tracking continues.
"Prism wait" will continue for the time period set in "Wait time".
If the target is not re-acquired after "Search (twice)", sighting terminates. Start Auto Tracking procedure 
again from step 1.
"Wait time" being set to "HOLD" (no limits), Auto Tracking procedure is as follows. The telescope does not 
move and keeps "Prism wait" status and when the prism comes into the field of view, the instrument starts 
Auto Tracking.

"Forecast time" (duration of search in predicted direction) and "Wait time" settings:  "10.1 Auto 

Pointing and Auto Tracking Settings" step 4

Difference in search and measuring distance operation

Operating icons related to sighting and measuring distance are different between Auto Pointing models 
and Auto Tracking models.
Search and measuring distance operations initiated by related Operating icons are different depending on 
the setting of "Track setting" and "Search method" in <Search/Track>.

• Auto Pointing model (there is no Operating icons related to Auto Tracking). l

   "Search/

Track" 

        setting

Operating
icon           

When "Search" set in "Track Setting"

When "None" set in "Track Setting"

"Srch method" is fixed to "G.S."

[SRCH]

Performs Auto Pointing

[MEAS]

Performs Auto Pointing then angle/
distance measurement

Performs angle and distance 
measurement

Auto Tracking

Obstacle

Target not found 

Target found

"Prism wait"

Target found

Auto Tracking continues in predicted

direction

"Target lost"

Search (twice)

Target found

Sighting terminates (Auto Tracking idle)

Target found

Target not found 

Target not found 

Target not found 

Summary of Contents for iX-1001


















































































































































































Reviews:

No comments