191
33. CHANGING THE SETTINGS
[TRAV]
: Traverse adjustment
[ROAD]
: Route surveying
[X SECT]
: Cross section survey
[TOPOII]
: Topography observation
[L-PLUM]
: Brightness configuration for laser plummet
[HVDOUT-T]
/
[HVDOUT-S]
: Output distance/angle
measurement results to an external instrument
[HVOUT-T]
/
[HVOUT-S]
: Output angle measurement results to an external instrument
[NEZOUT-T]
/
[NEZOUT-S]
: Output the coordinate results to an external instrument
[---]
: No functions set
Softkey Allocation Examples
It is possible to allocate the same key to each page (example 1). The same function can be allocated to more
than one key on the same page (example 2). And it is also possible to allocate a function to only one key
(example 3).
Allocation example 1:
P1
[MEAS] [SHV] [H-SET] [EDM]
P2
[MEAS] [SHV] [H-SET] [EDM]
Allocation example 2:
P1
[MEAS] [MEAS] [SHV] [SHV]
Allocation example 3:
P1
[MEAS] [SHV] [– – –] [– – –]
PROCEDURE Allocating functions
1. Select “Key function” in Config Mode.
Select “Define.” Currently allocated softkeys are displayed in
<Key function>.
2. Align the cursor with the softkeys whose allocation you want
to change using
{
}
/
{
}
.
The cursor of the selected softkey flashes.
Config
Obs.condition
Instr.config
Key function
Comms setup
Instr.const
Key function
Define
Registration
Recall
Key function
DIST
SHV
0SET
COORD
MENU
TILT
H-SET
EDM
MLM
OFFSET TOPO
S-O
OK