Sokkia CX-62, Operator'S Manual, Page: 99 / 315

91
15. SETTING-OUT MEASUREMENT
The point to be found based on the horizontal angle from the reference direction
and the distance from the instrument station.
PROCEDURE
1. Press [S-O] in the third page of
the OBS mode screen to display
<S-O>.
2. Select "Occ.orien." to set the
instrument station data and azimuth
angle of the backsight point.

"13.1 Entering Instrument
Station Data and Azimuth
Angle PROCEDURE Reading
in Registered Coordinate
Data"
3. Select “S-O data.”
4. Press [DISP] to change the
distance input mode to <S-O H>.
• Each time
[DISP] is pressed: S-
O Coord (coordinates), S-O HD
(horizontal distance), S-O SD
(slope distance), S-O VD (height
difference), S-O Ht. (REM
measurement).

15.1 Coordinates Setting-out
Measurement, 15.3 REM
Setting-out Measurement
15.2 Distance Setting-out Measurement
H d i s t :
H a n g :
0 . 0 0 0 m
OK LOAD DISP
S-O HD