Title: MAN 266, GTecLink Data loggers User Manual
Rev 1.0.1
Page 14 of 32
3.4 Sensors Data
The “Sensors data” screen displays the current r e a d i n g s o f
sensors connected to the data logger.
Here, you can verify that the sensor is connected correctly by
checking if the reading is consistent.
The node takes a new reading every time the refresh button is
pressed.
Bear in mind t h a t taking a reading m i g h t t a k e s ome time,
particularly when reading RS485 chains of digital sensors.
3.5 Radio Configuration
In this step, you select the radio settings.
Enable “Radio” and select the correct region of radio frequency.
For successful communication, the same region must be applied in
the gateway radio configuration.
Enter the network ID and password provided in the Gateway Information
Sheet.
All messages are encrypted with the network password.
