Title: MAN 266, GTecLink Data loggers User Manual
Rev 1.0.1
Page 11 of 32
To access node configuration, go to “Node configuration” from the main
menu and then “Setup Wizard”.
3.3 Sensor Configuration
Sampling Rate
Choose the desired reading frequency from the drop-down menu. The
highest possible sampling rate is limited by the network size and vice
versa.
Smaller networks can read up to every 30 seconds and frequency is
progressively reduced on bigger n e t w o r k s .
The app w i l l show the available sampling rates according to the network
size chosen in the previous step.
For more information regarding n e t w o r k size limitations, see the
Tables, Number of nodes, sampling rate and Slot time chapters in the
Gateway User Guide.
Each type of GTecLink data logger has its own sensor configuration
parameters.
For more information about the configuration of each sensor, go to
the corresponding data logger section.
Once the nodes are connected, we strongly recommend setting the
sampling rate again from the gateway in order to optimize the radio
configuration of the network.
