manualshive.com logo in svg

Soho WER-401, User Manual

Share
Download
Soho WER-401 User Manual Download Page 14

  

WER-401

 

Wireless SOHO Firewall Gateway 

Chapter 2

 

Hardware Setup 

2.1 Package 

Contents 

The product package should contain the following items: 

 

The Wireless SOHO Firewall gateway 

 

WER-401 User’s Guide on the CD 

 

Quick Installation Guide (in print) 

 

Registration and warranty card (in print) 

 

5VDC, 2.4A power adaptor 

 

One straight-through category 5 Ethernet cable 

If any of the parts are incorrect, missing, or damaged, contact your dealer. Keep the color box, including 
the original packing materials, in case you need to return the wireless SOHO Firewall gateway for repair. 

2.2 System 

Requirements 

The WER-401 wireless SOHO Firewall gateway is intended for use in a network of personal computers 
that are interconnected by 802.11b-compliant wireless adapters or twisted-pair Ethernet cables. 

2.2.1 Computer Requirements 

To install and run the WER-401 wireless SOHO Firewall gateway over your network of computers, each 
computer must have the following: 

 

An installed 802.11b-compliant wireless adapter 

OR 

 

An Ethernet Network Interface Card (NIC). 

For interconnecting your wired Ethernet devices, the WER-401 wireless SOHO Firewall gateway provides 
a 4-port switch capable of either 10 Mbps or 100 Mbps operation. Links operating at 100 Mbps must be 
connected with Category 5 cable. 

2.2.2  Access Device Requirement 

The shared broadband access device (cable modem or DSL modem) must provide a standard 10BASE-T 
Ethernet interface. 

Hardware Setup 

 

2-1 

Summary of Contents for WER-401
























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands