8.7. Door Lock*
Door lock is activated at the beginning of the
program in order to prevent the door from
opening. It can be unlocked between 45 seconds to
85 seconds after the program end. This time delay
is caused by the PTC which is assembled in the
door lock.
Door lock
Technical features
Nominal voltage
250 V
Testing component
Check the resistance value on the component with multi-meter as shown in below figures. Resistance
value should be 1000Ω ±50% at 20 °C.
Summary of Contents for D4 Series
Page 1: ...Manuel de service Séries D4 ...
Page 37: ...9 Wiring Diagram ...
