manualshive.com logo in svg

Softube AAX DSP, User Manual, Page: 12 / 182

Share
Download
Softube AAX DSP User Manual Download Page 12

System Requirements

Version 2.0 of the Softube plug-ins have the fol-

lowing minimum requirements:

All native versions

• 

Mac OS X 10.6, 10.7 or 10.8, with the latest 

updates.

• 

Windows 8, Windows 7 (latest Service Pack, 

32/64 Bit)

• 

Intel Core Duo, AMD Athlon 64 X2 or newer

• 

Screen resolution larger than 1280x800

• 

Any VST, VST3, AU, RTAS (Pro Tools 9) 

or AAX (Pro Tools 10.3.7, 11.0.2 or higher) 

compatible host application 

• 

iLok USB key and the latest iLok License 

Manager (download them from 

www.ilok.com

)

• 

Broadband internet access for downloading 

installer and register licenses.

Please, make sure that you always use the latest iLok Li-
cense Manager. It is not included in the Softube installer, 
but can be downloaded from www.ilok.com.

All Softube plug-ins support both 32- and 64-bit 

hosts and operating systems.
Supported sample rates: 44.1, 48, 88.2, 96, 176.4 

and 192 kHz, in both mono and stereo.
Windows XP and Vista are no longer officially sup-

ported.

VENUE System Requirements

The following Softube products are available for the 

Avid VENUE consoles. This table shows the maxi-

mum processor usage or the number of instances in 

mono on 44.1/48 kHz.

Product

Core

Accel

Acoustic Feedback Deluxe

< 68%

< 31%

FET Compressor

< 77%

< 35%

Tonelux Tilt

3 inst.

10 inst.

Tonelux Tilt Live

8 inst.

18 inst.

Trident A-Range

–

< 66%

Tube-Tech PE 1C

1 inst.

4 inst.

Vintage Amp Room

–

< 62%

Summary of Contents for AAX DSP























































































































































































Reviews:

No comments