23 • Control Keypad
6.9.3
Tripping/alarm Options – page 3
For easy viewing, tripping/alarm pages are not listed as in other pages but as a table.
As shown in the following table, each of relays A, B or C can be programmed to react to one or more of eight
fault conditions.
Note that other relays – D, E and F can not be programmed as a “tripping/alarm” relays.
Notes:
1.
All protections MUST be programmed in this page in order to be operative!!
2.
Each of the faults listed below can be programmed as DISABLED (-) or ENABLED (+)
3.
The table below shows factory defaults.
FAULT
Trip
Alarm
Auto
Reset
Panel
Reset
Remote
Reset
Output
A
Output
B
Output
C
________________________________________________________________________________________________
INSULATION TRIP
+
-
-
+
+
-
-
-
INSULATION ALARM
-
+
-
+
+
-
-
-
COMM PORT FAILED
-
+
-
+
+
-
-
-
LINE TEST FAILED
-
+
-
+
+
-
-
-
INTERNAL FAILURE
- + - + + - - -
EXTERNAL FAULT 1
- - - + + - - -
EXTERNAL FAULT 2
- - - + + - - -
EXTERNAL FAULT 3
- - - + + - - -