21
Meddream VideoStation functionalities v4.6.1 Install Manual
Figure 27. Recording settings
Activate source profile - display video input source streaming window in application include on startup.
Update or change source profile settings.
Delete source profile. If source is active
– requires to stop source.
Reload all active sources.
Add new source profile.
Can copy full stream address.
Download VLC media player format playlist file, that contains the same stream address.
NOTE!
Do not enable the same video input source from multiple profiles. For e.g. added camera to profile A
and the same camera to profile B and enabled both of them, to be active in VS application. In this situation,
just profile A will start and profile B will fail, because input signal will be taken.
There are possibility to play A and B profiles, but card must allow this (play input signal via windows direct
show and other via capture card interface
– if this exist). This possibility does not make any seance to have 2
the same signals recording and it can cause unstable input stream recording process.
Clicking the update
or add new
controls in the profiles list, opens the RECORDING PROFILE
SETTINGS window to configure the recording profile.
Also, there is direct access to recording profile settings from near stream window - settings button:
