Softlog Systems (2006) Ltd.
1 Installing ICP2 and ICP2-GANG on USB Port
The following steps will show how to install the device under Windows XP. Basically, the procedure is also
somewhat the same for other Windows operating systems.
1.
Power on your PC and boot to Windows
2.
Install ICP Family software from supplied CD or from
(file IcpWin_setup_x_xx.exe) to
directory “C:\Program Files\Soft-Log\IcpWin”
3.
Connect ICP2/ICP2-GANG to the PC with a USB cable. “POWER” LED on ICP2 may not work until
device is not installed on USB port
4.
Windows will detect the new device and will initiate the “Found New Hardware Wizard” prompting you to
install the software for the detected USB device
5.
Select “No, not this time”. Click “Next” to continue
6.
Select “Install from a list or specific location (Advanced)”. Click “Next” to continue
18 Rojansky St, P.O.B. 17007, Rishon-Letzion 75070 Israel, Fax: 972-3-9527520
E-mail:
Web:
www.softlog.com
