SOFTLINK NB-K868, Manual, Page: 27 / 41

Table 2: Overview of NB-K868 module configuration parameters
Item Name Type Description Default.
1 Timezone number Time zone (time from UTC) 1
2 Server IP code target server IP-address
3 Ping IP code IP address for ICMP tests
4 Server port number target application port number 2000
5 Reply yes/no
setting of reply to setting messages from the
network
no
6 My src port number port number of source application read only
7 APN text private network Access Point Name
8 Max session time number Session timeout 2 days
9 Send period 0 - 65535 Broadcasting period in minutes 240
10 Hist. period number historical readings storing period 0
11 Send mask number number of message content mask 3
12 Encryption code Encryption key indiv.
Status of 868 MHz modem
13 No. sent curr. status No of sent messages from reset read only
14 No. recv curr. status No of received messages from reset read only
15 No. recv curr. status No of received error messages from reset read only
16 Recv. window number length of receiving window 40
Status of NB-IoT modem
17 Next send curr. status Time to next message in minutes read only
18 No. sent curr. status No of sent messages from reset read only
19 No. recv curr. status No of received messages from reset read only
20 Modem state curr. status internal GSM module status read only
21 Session count curr. status number of sessions from rese read only
22 Session timeout curr. status time to closing of current session read only
23 Modem IMEI curr. status internal GSM module unique ID read only
24 SIM CCID curr. status unique number of inserted SIM-card read only
25 SIM IMSI curr. status unique number of SIM-card user read only
26 Last RSSI curr. status signal level of last received message read only
Software status
27 Conf. version curr. status No of stored images since last FLASH erasure read only
28 SW version curr. status version number and date of issue read only
List of settings of read devices
29 ID character identifik´ ator zaˇ r´ızen´ı (v´ yrobn´ı ˇ c´ıslo)
30 DIF/VIF 1 code DIF/VIF for selection of the first varaible 00 00
31 DIF/VIF 2 code DIF/VIF for selection of the second varaible 00 00
32 DIF/VIF alarm code DIF/VIF alarmov´ e promˇ enn´ e 00 00
33 Alarm bit Burst number flag value for the
”
Burst” alarm 0
34 Alarm bit Leak number flag value for the
”
Leak” alarm 0
35 Alarm bit Battery number flag value for the
”
Battery” alarm 0
36 Alarm bit Back Flow number flag value for the
”
Back Flow” alarm 0
NB-K868 24