Chapter 9 - Settings pages
TH LINK PROFINET - Installation Manual
29
9.2.3.2 Apply parameters
By default all TH LINK are set as parameter receiver. Before taking
over the parameters of a TH LINK, make sure that this TH LINK is
set as a parameter provider.
1. Log in as administrator.
2. Click
Settings
TH SCOPE.
3. On
Parameter distribution
Apply parameters
click
Request
to request the parameters from the parameter
provider.
4. The TH LINK restarts and you will be logged out as
administrator automatically.
Note
Applying and storing of parameters causes an automatic
restart of the TH LINK. Make sure you are using an SD card
and you have set the parameter
Data restore after
voltage recovery
in TH SCOPE settings to
Yes
. Thus you
