Chapter 9 - Settings pages
28
TH LINK PROFINET - Installation Manual
9.2.2
Alert
The alerting settings include the alerting via relay contact, the email
alerting, alerting interval, SMTP server settings, email sender and
receiver, subject and sending of a test email.
For detailed information about each setting, click on the question
mark.
9.2.3
Parameter distribution
The parameter distribution serves for a quick and easy
configuration of several TH LINK. Therefore one TH LINK has to be
set a parameter provider. All other units can request the parameters
from this device.
9.2.3.1 Set parameter provider
The TH LINK from which all other units can take over the set
parameters is called parameter provider.
1. Log in as administrator.
2. Click
Settings
TH SCOPE.
3. Select the distribution role
Parameter provider
and save your
settings by clicking on the floppy disk icon.
4. Configure this TH LINK completely.
5. Log out by clicking
Logout
.
Select the distribution role
Parameter provider
and save your
settings by clicking on the floppy disk icon.
Note
Only one parameter provider is allowed in the entire
network.
