Chapter 5 - Declarations by the m anufacturer
PBpro ETH - User Guide
33
5
Declarations by the manufacturer
This device complies with the requirements of the EC directive 2004/108/EG
"Electromagnetic Compatibility" (EMC directive). It meets the following requirements:
Emission:
- EN 55011
Limits and methods of measurement of radio disturbance
characteristics of industrial, scientific and medical (ISM) radio
frequency equipment, group 1, class A
- EN 55022
Information technology equipment; Radio disturbance
characteristics; Limits and methods of measurement, class A
- EN 61000-6-4 Electromagnetic compatibility (EMC); Part 6-4: Generic standard –
Emission standard for industrial environments
Immunity:
-
EN 61000-6-2 Electromagnetic compatibility (EMC); Part 6-2: Generic standard -
Immunity for industrial environments
A Declaration of Conformity in compliance with the above standards has been
made and can be requested from Softing Industrial Automation GmbH.
Note
To fulfill the EMC requirements, the other components of your installation (DC
adapter, Industrial Ethernet devices, etc.) also have to meet the EMC
requirements. A shielded cable must be used. In addition, the cable shield
must be grounded properly.
CAUTION
This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures!
FCC
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
VCCI
Additional tests have been performed successfully proving compatibility with
the requirements set forth by VCCI.
ROHS
The PBpro ETH device is ROHS compliant.
