Modbus Gateways - User Guide
40
Version EN-092019-1.21
6.1.3
Creating a project in PACTware
1. Start PACTware.
2. Create a new Project and save the project.
3. Right-click
Host PC
Add Device
in the device tag column of the project view.
A new window appears with the available devices.
4. Select
PROFIdtmDPV1
from the list and confirm with
[OK]
.
The device is displayed in the project view.
Note
Before starting a topology scan make sure the corresponding Device DTM is installed.
5. Right-click
PROFIdtm
and select
Topology Scan
.
6. Click the arrow in the scan window to start the topology scan.
PROFIdtm and the PA device are displayed in the project view.
7. Close the scan window. The device is now included in the project view.
