Cha pter 3 - Ins ta l l a ti on
© Softing Industrial Automation GmbH
15
3.1.4 Connecting to the network
1.
Connect the FG-200 to the Modbus TCP network to one of the two Ethernet ports (ETH1
or ETH2).
2.
Connect each link of your FOUNDATION fieldbus H1 network via a power conditioner
to a Fieldbus Channel port of your gateway (CH0 to CH3).
Note
When using the FG-200 as linking device you can broadcast High Speed Ethernet
(HSE) and Modbus TCP over the same Ethernet port.
FG-200 with redundancy connection
