Softing Data Flow commModule MBP, Hardware Manual

Page: 20 / 36

commModule MBP - Hardware Manual
20
© Softing Industrial Automation GmbH
with level of protection 30V according to table 5 in
IEC 60079-0
Pin 40 to 43 FDE_PO, FDE_PI,
FDE_NO, FDE_NI
No requirement on creepage distances between these
signals.
Clearance and creepage distance to all other signals
with level of protection 30V according to table 5 in
IEC 60079-0
7.5 Label
The commModule MBP is marked with a label similar to the example below.
7.6 Maintenance and spare parts
The device does not require any maintenance.
In case of malfunctioning or failure, disassemble the device or the affected part and return this device to
Softing for repair.