Softing IT Networks LinkXpert, Manual

Page: 39 / 54

39
LinkXpert Manual English © 2022 Softing IT Networks
Individual tests
6.1.1
Link-LED
To identify the link LED on the switch, LinkXpert can flash the link LED
of the switch port. To do this, LinkXpert must be connected to a
switch via the copper or fiber interface.
This test is only available in Tools mode.
Function keys:
1. Back one menu level higher
2. Change settings
Make link LED flash for 10MBit/s
Link LED for 100MBit/s flashing
Make Link LED blink for 1GBit/s
3. Trigger test
6.1.2 Link Status
1 2
Function keys
Link Status
Please note:
1. For copper and fiber networks, the Link LED will also light up
when connected to the network.
See also
Device Connections
2. For WLAN networks, the connection is only indicated by the
WLAN icon in the status bar.
Function keys: (only in the Tools module)
1. Back one menu level higher
2. Start test
9