SoftBank SoftBank 106SH, User Manual

Page: 17 / 126

15
Getting Started
SoftBank 106SH
Battery Installation
Inserting Battery
Remove Battery Cover
・Use notch (○) to lift Battery Cover. Push up Battery Cover
along edges to remove it.
Insert Battery
・With Battery tab facing up, align Battery terminals with
charging terminals.
・Take care not to get Battery tab caught between base and
Battery Cover.
Replace Battery Cover
・Align Battery Cover with handset, then firmly press down
along shaded areas.
・Close Battery Cover firmly. Debris trapped between battery
housing area and Battery Cover gasket may expose handset
to liquid/dust.
Removing Battery
Always power off before removing Battery.
Remove Battery Cover
・Use notch (○) to lift Battery Cover. Push up Battery Cover
along edges to remove it.
Remove Battery
・Take hold of Battery tab (printed PULL) and gently lift
Battery as shown.
・Fold back Battery tab to black area; may get caught
between base and Battery Cover upon replacing Battery
Cover.
・If Battery tab rips off and Battery cannot be removed,
contact a SoftBank Shop.
Replace Battery Cover
・Align Battery Cover with handset, then firmly press down
along shaded areas.
・Close Battery Cover firmly. Debris trapped between battery
housing area and Battery Cover gasket may expose handset
to liquid/dust.
Lithium-ion Battery
This product requires a lithium-ion battery. Lithium-ion
batteries are recyclable. To recycle a used lithium-ion
battery, take it to any shop displaying the symbol below.
・To avoid fire or electric shock, do not short-circuit or
disassemble Battery.