Home
/
Soehnle
/
3035
/
Manual

Soehnle 3035, Manual, Page: 215 / 240

Share

Page: 215 / 240

Soehnle 3035 Manual Download Page 215

215

Enabling switching outputs
Outputs are held in low state after a power failure and/or voltage drop, and after a terminal
reboot.

The terminal automatically proceeds to the Enable window.

By enabling with YES with the F1 to F3 Function keys, the outputs are again enabled to their
relevant process-dependent state. The IO control is set to Off if enabling is rejected with NO with
the F4 to F6 Function keys. The inputs/outputs are only reenabled by resetting the IO control to
"On" or "On With Safety Function" in setup mode.

7.11.2 Outputs

Output settings
Start setup mode with F6 key in the Setup Functions key level.
Highlight Communication with the F4 Arrow key, F6 Next.
Highlight IO Control with the F4 Arrow key, F6 Next.

Highlight Outputs with the F4 Arrow key, F6 Next.

«
...
213
214
215
216
217
...
»

Summary of Contents for 3035

















































































































































































































































Reviews:

No comments