53
A printer, a large display or an IT/ PC can be connected to the terminal with the
optional serial interface (RS232).
The interface function is configured according to the separate descriptions
470.702.126 User mode and 470.508.108 Data interface.
A printout or data set transmission can be triggered with the SEND button or by
request via EDP.
The SEND button can be freely assigned by pressing the INFO and SEND buttons.
Then the data set/print image no. is selected by pressing the function or tare
button. Confirm the selection with the SEND button.
(The content and the assigned data output channel of the respective selection no.
of the print image or data set is shown on the display.
print image or data set is described in 470.508.108 Data interface).
8.2 Hold function
With the hold function you can freeze a weight value for a certain period of time.
Before you can activate this function, however, you must make sure that the
hold function has been assigned to the freely assignable function button (see
chapter 8.1).
The settings for the hold function are made in the setting mode (see separate
description 470.702.126 User Mode UCAL1 Item 02).
The hold function is not active by default.
The following settings are available:
In weighing mode, you can either activate or deactivate the hold mode using the
function button.
8.3 Printing / IT connection
Hold-Mode Function
Cancel function
0
Not active
-
1
At standstill > Empty
Unloading the scale / F button
2
Max. Value at standstill > Empty Unloading the scale / F button
3
Drag pointer > Empty
Unloading the scale / F button
HOLD
OPTION
AL
FUNC
TIONS
8
8. Optional functions
