Sodex Sport S80103 Quick Start Manual Download Page 1

 1

 

DETAILS

 

SODEX INTERNATIONAL

 

18 rue de l

Avenir 

-

 Bât. 224

 

14650 CARPIQUET

 

Phone: + 33 (0) 2.31.53.78.70

 

Email: [email protected]

 

 

DESCRIPTION

 

Steel structure 

ф90

 

Plastified

 

 

 

CONFORM

 

European norm

 

 

NF EN 16630

 

 

PRODUCT SHEET

 

SURFING BOARD

 

PRODUCT REF 

:

 

S80103

 

UNIT

 

MAINTENANCE

 

The equipement has to be regularly maintained by the owner. If one of the modules has to be repaired,  
users should not be able to access to it until the repair is done. To ensure good use, routine visual ins-
pections are required, paying special attention to the following points: The cleanliness, ground clearance, 
surface condition, visible foundations, sharp edges , missing parts, excessive wear of moving parts and 
the structural integrity. Moreover, a more thourough functional check should be carried out every two 
months on the following points:

 

-

  Check that all the screws are correctly tightened

 

-

  Remove all the non expected elements (ex: stickers, clothes, ropes,

…)

 

-

  Fix paint defects if the module has been damaged, using the adapted paint, specified by the manufactu-

rer.

 

-

  Replace all damaged or missing parts with a spare part recommended by the manufacturer.    

 

-

   Check that all the instruction labels stuck on the modules are in condition and are readable.  Replace 

them if necessary.

 

-

   Check the stability of the modules. If one of them is sligthly unfixed from the foundation,  

 

    

 

-

   Check that all the anchors are secure in the ground.    

 

-

   Clean all dirty parts with soapy water.

 

Every year, it is recommended to check carefully the ground fixation. In order to do this, remove the dirt 
covering  the attachment plate, and inspect cautiously the wear of the fixations and of the concrete. Re-
place them if necessary.  Check that the screws are firmly tightened.

 

WARRANTY

 

One full year parts and labor guarantee. Every claim regarding condition of the delivered equipment has to 
be done within the legal period of the reception of the material. The warranty will not apply to:     

 

-

    all degradation during the transport.     

 

-

    all degradation due to use differing from which was intended.

 

-

    all degradation due to poor maintenance.     

 

-

    any defect claimed after the end of the legal period.     

 

THIS PRODUCT HAS BEEN BUILT AND DESIGNED ACCORDING TO THE FRENCH AND EUROPEAN STANDARD EN

-

NF  16630

 

 

Summary of Contents for S80103








Reviews: