Sodex Sport S30061 Assembly Instructions Manual Download Page 1

 1 

 1 

 

 

 

 
 

 

 

 

DESCRIPTION 

Steel structure D90 

Powder coated 

 

 

CONFORM 

European norm 

 

NF EN 1271 

 

 

ASSEMBLY INSTRUCTIONS 

VOLLEYBALL  POST ON BASE 

PRODUCT REF 

S30061 

 

PAIR 

 

ASSEMBLY TIME 

The time to make the assembly of this volleyball post is estimated for 1 person, at 20minutes. (without sealing).

 

MAINTENANCE 

The equipement has to be regularly maintained by the owner. It is adviced to: 

- Check every week that all the screws are correctly tightened 

- Fix paint defects if the module has been damaged, using the adapted paint, specified by the manufacturer. 

- Replace all damaged or missing parts with a spare part recommended by the manufacturer.  
- Clean the product by using dishwasher soap, clean water, and soft cloth

It is advised to carry out this cleaning once or twice a year, or even more regularly according to the environmental 

conditions (saline environment, …). 

WARRANTY

 

One full year parts and labor guarantee. Every claim regarding condition of the delivered equipment has to be done 

within the legal period of the reception of the material. The warranty will not apply to:      

-    all degradation during the transport.      

-    all degradation due to use differing from which was intended. 

-    all degradation due to poor maintenance.      

-    any defect claimed after the end of the legal period.      

-    any damaged due to a faulty installation and assembly of the module 

Summary of Contents for S30061












Reviews: