1
1
DESCRIPTION
Steel structure
Powder coated
CONFORM
European standard
NF EN 1270
ASSEMBLY INSTRUCTION
MOBILE AND FOLDABLE BASKET-
BALL GOAL 3.25M
PRODUCT REF
S14650
UNIT
ASSEMBLY TIME
The assemblage time of the basketball goal is estimated at 120 minutes, with 3 persons (without sealing).
TEST AFTER INSTALLATION
According to the regulation, for the first installation the goal must be tested like below :
Put a vertical and static charge of 320 kg, at the junction between the backboard and the ring, during 1 minute.
After these tests, the equipment and the fixation system should not have break, move or show residual deformation.
During the first installation, this stability and solidity test is compulsory.
Every time that the equipment is assembled, a visual check of the stability and solidity must be realized.
The owner must regularly check the condition of the product.
For an optimal use of our products, we advise to follow the installation and maintenance instructions.
MAINTENANCE
The equipement has to be regularly maintained by the owner. It is adviced to:
- Check every week that all the screws are correctly tightened
- Fix paint defects if the module has been damaged, using the adapted paint, specified by the manufacturer.
- Replace all damaged or missing parts with a spare part recommended by the manufacturer.
- Clean the product by using dishwasher soap, clean water, and soft cloth.
WARRANTY
One full year parts and labor guarantee. Every claim regarding condition of the delivered equipment has to be done
within the legal period of the reception of the material. The warranty will not apply to:
- all degradation during the transport.
- all degradation due to use differing from which was intended.
- all degradation due to poor maintenance.
- any defect claimed after the end of the legal period.
- any damaged due to a faulty installation and assembly of the module.
