DETAILS
SODEX INTERNATIONAL
18 rue de l
’
avenir –
Bât. 224
14650 CARPIQUET
Phone: + 33 (0) 2.31.53.78.70
Email: [email protected]
DESCRIPTION
Alu structure
ф 101.6
Powder coated
7.32m x 2.44m
CONFORM
European norm
EN 748
PRODUCT SHEET
ALUMINIUM FOOTBALL GOALS,
7.32x2.44M, TO SEAL
PRODUCT REF
:
S12201
PAIR
TEST AFTER INSTALLATION
According to the reglementation, for the first installation the goal must be tested like below :
Put a vertical and static charge of 320 kg, at the jonction of the pannel and the basket , at 0.20m of the
ground, during one minute.
During the first installation, this stability and solidity test is compulsory.
Every time that the equipment is assembled, a visual check of the stability and solidity must be realized.
The owner must regularly check the condition of the product.
MAINTENANCE
The equipement has to be regularly maintained by the owner. It is adviced to:
-
Check every week that all the screws are correctly tightened
-
Fix paint defects if the module has been damaged, using the adapted paint, specified by the manufactu-
rer.
-
Replace all damaged or missing parts with a spare part recommended by the manufacturer.
If the forecast planned a bad weather (strong wind,
…),
the goal should be removed from the sheaths and
put on the ground.
WARRANTY
One full year parts and labor guarantee. Every claim regarding condition of the delivered equipment has to
be done within the legal period of the reception of the material. The warranty will not apply to:
-
all degradation during the transport.
-
all degradation due to use differing from which was intended.
-
all degradation due to poor maintenance.
-
any defect claimed after the end of the legal period.
-
any damaged due to a faulty installation and assembly of the module
THIS PRODUCT HAS BEEN BUILT AND DESIGNED ACCORDING TO THE FRENCH STANDARD NF S 52
-
409
