Enjoy your sparkling water or add your preferred SodaStream Sparkling Drink Mix flavour
to enjoy a sparkling flavoured beverage!
For sparkling drink mixes:
After making sparkling water hold the open carbonating
bottle
at an angle
and slowly add the desired flavour by pouring it slowly and carefully
down the inside wall of the bottle. Close with the fizz-preserving cap and tighten, then
mix with a gentle shake. Enjoy!
ONLY CARBONATE WATER .
NEVER CARBONATE AFTER FLAVOUR HAS BEEN ADDED.
4.
The pressed button will start to flash slowly indicating that it is carbonating. The
button will flash quickly when carbonation is complete. You may carbonate again
without removing the carbonating bottle by repeating the process. Pressing any
button during carbonation will stop the carbonation process. When the desired level
of carbonation is achieved, gently pull the carbonating bottle towards you until it
reaches its fully forward position. This will release all the pressure in the bottle and
allow the bottle to release itself from the Snap-Lock. Always allow the bottle to
release itself. Never pull the carbonating bottle out of the Snap-Lock. If the
carbonating bottle does not immediately release from the Snap-Lock wait a few
moments and it may release. If it still does not release, then push the bottle back
into the vertical position and repeat the process.
WARNING:
DO NOT
remove the bottle until you hear the sound of excess CO
2
releasing.
Sparkling Drink Mix
Enjoy!
FLAVOUR YOUR WAY!
CREATE THE BUBBLES
