22
This procedure will put the reader in discoverable mode.
If the reader is paired with a device, unpair it before trying to connect to
a different device.
Step 1: Remove or forget the reader from the Bluetooth list on the host
device.
Ste
p 2: Scan Pairing Reset barcode.
Or, follow the Pairing Reset button sequence:
1. Power on the reader.
2. Press the trigger button then power button and hold both until you hear 3
beeps.
The reader will unpair and automatically power off. The next time you power
on the reader, it will be discoverable.
Important
: Both steps above must be done to complete the unpairing.
Watch
for demonstration.
pairing reset