User’s Guide
Bluetooth
®
CHS
7X, 7XRx
© 2009 Socket Mobile, Inc. All rights reserved. Socket, the Socket logo, SocketScan, Connect!Agent, ActivePairing, Socket Bluetooth
Cordless Hand Scanner, and Business Mobility Now! are registered trademarks or trademarks of Socket Mobile, Inc. The Bluetooth word
mark is a registered trademark of the Bluetooth SIG, Inc. USA, and any use by Socket Mobile, Inc. is under license. All other trademarks
and trade names contained herein may be those of their respective owners.
System Requirements:
1. HID with Keyboard Translation support
2. Any of the following OS platforms:
-Windows Mobile/CE 5 or 6.1
-Windows 7/Vista/XP
OR
Any of the following devices:
-Socket SoMo
-Dell Axim 51v with WM/CE 5
-HTC with WM/CE 6.1
3. Bluetooth support with any of the following stacks:
-Microsoft SP3 BT v2.0
-Microsoft BT v2.1 with Win 7
-Toshiba BT v2.0, v1.2, v1.1
-Broadcom BT v2.0
-BlueSoleil v2.3.00 or v5.4.11 BT v2.0
Basic Functionality
*Note that no software is required for normal operation
Function Procedure(s)
Powering on /off
Power On:
Press and hold down the
power button until you hear two (low-high)
tones.
Power Off:
Press and hold down the
power button until you hear two (high-low)
Scanning bar
codes
Press and release Trigger button when
scanning bar codes. The scanner will beep,
flash LED, and vibrate confirming the bar
code has been decoded and data
transferred to the paired system.
Factory Reset
Reverts CHS back to factory default state.
1.
Power on CHS
2. Press and hold down the
Trigger button and momentarily
press the Power button while
still holding down the Trigger
button.
3.
After 15 seconds, a single beep
following a series of 5 tones will
play confirming reset is
Pairing Reset
Releases the Bluetooth pairing from the last
system the scanner was paired to. This
allows new pairing to another system.
1.
Power on CHS
2.
Press and hold down the
Trigger button and press the
Power button until you hear a
series of 3 tones.
Retrieving Scanner and Firmware information
1.
Power on CHS and pair via Bluetooth with system.
2.
Open Notepad or Notes application and set cursor in application.
3.
Press and hold down Trigger button for 15 seconds or until information
outputs in text into Notepad /Notes application.
Package Contents
•
1 Socket Bluetooth Cordless Hand Scanner
•
1 Rechargeable Li-ion Battery installed (do not remove)
•
1 Charging cable (Cradle not included)
LED
LED LED
Behavior
Meaning
1 blink per
second
Bluetooth
radio is on, but not
connected
Bluetooth
Status (Blue)
1 blink per 5
seconds
Scanner connected to system
1 blink per
scan
Data successfully scanned and
transmitted to host device
Good Read
(Green)
On solid
When charging and is fully
charged
1 blink per
second
When battery is low
On solid
Battery in process of charging
Battery
Status (Red)
Off
Off or Good Battery status
Beeps
Beep Patterns
Meaning
2 beeps (low-high)
Power on
2 beeps (high-low)
Power off
1 beep (with Blue LED)
Initial connection to system
1 beep following 2 beeps
(same tone)
Re-connection to last paired system
3 downstream beeps
Pairing Reset completed. Scanner will
power off
1 beep following series
of 5 beeps
Factory Reset completed. Scanner will
power off
LED
Trigger button
Power button
Summary of Contents for CHS 7X
Page 7: ......
