SECTION 4
NORMAL PROCEDURES
SOCATA
MODEL TB 20
The content of this document is the property of
socata
. It is supplied in
confidence and commercial security of its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor
may information contained in it be disclosed to unauthorized persons. It must not
be reproduced nor transmitted in any form in whole or in part without permission
in writing from the owners of the Copyright.
Information in this document is subject to change without notice.
© 1988, 1991, 1992, 1994 to 1996, 1997, 2000 -
socata
- All rights reserved
June 30, 1988
Revision 5
4.13
BEFORE TAKE–OFF
Seats, seat belts,
shoulder harnesses
Check
Doors
LOCKED
Controls
Free
Pitch trim
TAKE–OFF
Rudder trim
TAKE–OFF
Flaps
TAKE–OFF
Magneto selector
BOTH
”Alternate Air”
Pushed
Propeller
FULL FORWARD
Mixture
FULL RICH
Fuel selector
Check set to fullest tank
Fuel pump
ON
Oil temperature
Green sector
Oil pressure
Green sector
Voltmeter
Green sector
Altimeter
Set
Heading indicator (if installed)
Set
Horizontal attitude gyro (if installed)
Set
Parking brake
RELEASE – Light OFF
Cabin blower (if installed)
OFF
Landing lights
As required
Navigation lights
As required
Pitot heating (if installed)
As required
Transponder (if installed)
As required
Air conditioning switch (if installed)
”OFF”
TAKE–OFF
Lined up on
runway
Check heading indicator
Check emergency compass
Smoothly apply full power
Airspeeds
See Section 5
STANDARD AIRSPEEDS :
Rotation
68 KIAS
Initial climb
75 KIAS