background image

5

Safety Symbols

The following table depicts and describes safety symbols that may appear on this product. Read, understand and follow all 

instructions on the machine before attempting to assemble and operate.

READ THE OPERATOR'S 

MANUAL(S) – Read, understand 

and follow all instructions in the 

user manual(s) before attempting 

to assemble and operate.

SAFETY ALERT – Indicates  

a precaution, a warning or  

a danger.

WARNING! Do not expose the unit 

to rain or wet conditions.

Wear hearing protection. 

Wear eye protection. 

Wear breathing protection.

Keep bystanders and children  

a safe distance away.

Symbols

Symbols

Descriptions

Descriptions

DANGER! Rotating blades 

pose a serious risk of injury. 

Keep hands and feet away from 

openings while the machine is 

running.

The rotating part will continuously run 

for several seconds after you turn off 

the machine.

Beware of flying objects and 

debris.

WARNING! Turn the machine OFF 

and disconnect it from the power 

supply before inspecting, cleaning, 

changing accessories or conducting 

any other maintenance task.

Indoor use only. Only use battery 

charger indoors.

Summary of Contents for SUNJOE 24V-WSB-LTE

















Reviews: