background image

13

Optional Accessories

m

WARNING!

 ALWAYS use only authorized Snow Joe

®

 + Sun Joe

®

 replacement parts and accessories. NEVER use 

replacement parts or accessories that are not intended for use with this cordless vacuum. Contact Snow Joe

®

 +  

Sun Joe

®

 if you are unsure whether it is safe to use a particular replacement part or accessory with your cordless  

vacuum. The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage.

iON+ 24V Lithium-Ion Battery Quick Charger 

24VCHRG-QC

Model

Accessories

Item

1

2

3

4

5

6

iON+ 24V 2.0 Ah Lithium-Ion Battery 

Battery Charge Time Max:
24VCHRG-QC: 55 min | 24VCHRG-DPC: 55 min
Battery Runtime Max: 10 min on high | 15 min on low

24VBAT-LTE

iON+ 24V 2.5 Ah Lithium-Ion Battery 

Battery Charge Time Max:
24VCHRG-QC: 1 hr 10 min | 24VCHRG-DPC: 1 hr 10 min
Battery Runtime Max: 15 min on high | 20 min on low

24VBAT-LT

iON+ 24V 4.0 Ah Lithium-Ion Battery 

Battery Charge Time Max:
24VCHRG-QC: 1 hr 50 min | 24VCHRG-DPC: 1 hr 50 min
Battery Runtime Max: 20 min on high | 30 min on low

24VBAT

iON+ 24V 5.0 Ah Lithium-Ion Battery 

Battery Charge Time Max:
24VCHRG-QC: 2 hrs 20 min | 24VCHRG-DPC: 2 hrs 20 min
Battery Runtime Max: 30 min on high | 40 min on low

24VBAT-XR

iON+ 24V Lithium-Ion Battery Charger 

24VCHRG-DPC

 

NOTE: 

Accessories are subject to change without any obligation on the part of Snow Joe

®

 + Sun Joe

®

 to provide notice of such 

changes. Accessories can be ordered online at sunjoe.com or via phone by contacting the Snow Joe

®

 + Sun Joe

®

 customer 

service center at 1-866-SNOWJOE (1-866-766-9563).

Summary of Contents for SUNJOE 24V-WSB-LTE

















Reviews: