9
4. Secure the connection of the upper frame to the middle
frame by fastening the second set of knob and bolt on
each side (Fig. 4).
5. Clip on the 3 cable clips on the frame, and insert the cable
inside the cable clips (Fig. 5).
Chute Crank Assembly
1. Remove the cotter pin from the lower chute crank (Fig. 6).
2. Install the lower crank rod by inserting it into the opening
at the back of the housing with holes aligned (Fig. 7).
3. Secure the lower chute crank in place with the cotter pin
(Fig. 8).
4. Remove the thumbscrew on the crank rod connector by
hand (Fig. 9).
Fig. 3
Upper frame
Extension
cord restraint
hook
Fig. 4
Middle frame
Upper
frame
Knob + bolt
Fig. 5
Cable clips
Cable
Fig. 6
Cotter Pin
Lower chute crank
Fig. 7
Lower chute crank
Align the holes
Fig. 8
Cotter pin
