8
Unpacking
Carton Contents:
• Electric snow thrower with middle frame and upper frame
• Upper crank rod
• Lower crank rod
• Extension cord restraint hook
• Cable clips (3)
• Handle knobs and bolts (4 sets)
• Manuals with registration card
1. Carefully remove the electric snow thrower and check to
see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new electric snow
thrower. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations or save the packaging for long-term
product storage.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suffocation
risk!
Assembly
m
WARNING!
Inspect wiring, which, if damaged during
shipping, may cause serious bodily injury during equipment
use. If any damage is seen or suspected, do not assemble.
Instead, contact the Snow Joe
®
+ Sun Joe
®
customer service
center at 1-866-SNOWJOE (1-866-766-9563) for assistance.
Handle with care during assembly so that electrical wiring does
not become damaged.
Handle Frame Assembly
1. For easy assembly, the unit comes complete with
most parts already connected. To complete the handle
assembly, simply pull the middle frame back and pull the
upper frame up (Fig. 1).
2. Secure the connection of the middle frame to the lower
frame by fastening the first set of
knobs and bolts on each
side (Fig. 2).
3. Before securing the upper frame, slide the extension cord
restraint hook up the upper frame (Fig. 3).
Fig. 1
Upper frame
Middle frame
Lower frame
Fig. 2
Lower frame
Middle
frame
Knob + bolt
